0.8mm Tungsten Carbide Lathe Inserts coated Machine Cutting Tool

Tungsten Carbide Indexable Lathe Inserts TCMT1604** PT30

The materail of Indexable lathe Inserts is Tungsten Carbide. Negative-rake inserts are the first choice for most turning applications. With strong cutting edges on two faces, they last longer than comparable positive-rake inserts. When all the edges on one face are worn, flip the insert over.They are suitable for steels,such as Carbon Steel, Cr20, Cr30, Cr40. The effect of the chip breaker is very good. they have a good anti-breakage and a low too wear too.

Choose inserts for continuous cutting conditions when machining pieces that allow for constant contact between the insert and the workpiece, such as round rods. Inserts for semi-interrupted cutting conditions are the most commonly used, often to machine imperfectly round workpieces, such as shafts with a keyway. Inserts for interrupted cutting conditions are best for workpieces that will come in and out of contact with the insert, such as hexagonal bars.

The above specifications are standard Size, with a large amount of stock. At the same time, we support OEM customized production, the corner is 0.2mm to 1.2mm.

0.8mm carbide lathe inserts

Steel Finishing Inserts 0.4mm

carbide lathe inserts 0.4mm

0.8mm Tungsten Carbide Lathe Inserts coated Machine Cutting Tool Images